Sips Homes ~ Sips Home Manufacturers ~ Sips Houses
 
004.jpg (18kb) 020.jpg (693kb) 017.jpg (24kb) 018.jpg (102kb)

7~20~7
 
 
 
     
 
     
 
 
     
 
     
 

Structurally Insulated Panelized System (SIPs) Homes, Sips Houses, Sips Buildings & Expanded PolyStyrene Homes & Houses

  
     
     
 
 
     
 

 
     
 
 
     
     
 

"Energy Efficient SIPs Upgrades Increases Market Values of Homes"

 
     
  Our   Structurally Insulated Panelized System SIPs Homes maintain a "Higher Resale Value" than traditional Stick Built Homes.  
     
 
 
     
 
 
     
 
 
     
 

See how Our  homes have a "Higher Resale Values" than a typical stick built homes, and can increase the "Resale Value of your Home"

 
     
     
 
 
 
     
 
     
 
     
 
     
 
 
     

Sips Homes, Houses and Buildings For Sale In Prescott, Phoenix & Northern Arizona

Sips Homes & Houses for sale, Expanded PolyStyrene Steel framed Buildings; Manufacturers of Sips Homes Houses & Buildings
  • Sips Homes For Sale
  • Sips Buildings For sale
  • Sips Homes Manufacturing
  • Sips Homes Builders in Arizona
    •
  • Expanded PolyStyrene (EPS) Sips Homes For sale
  • Sips Home Manufacturers
  • Arizona Sips Homes For Sale
  • Sips Home Contractors
  • Arizona service businesses for sale
  • Sips Home Multi family and Apartment Manufacturers
  • Du-Plexes, Tri-Plexes and Four-Plex unit Sips Homes
  • Arizona Sips Homes Construction Companies
  • Sips Homes, Sips Houses and Sips Multi Family Homes
  • SIPs Homes, Sip Houses, PolyStyrene Homes & Houses for sale
  • Expanded PolyStyrene (EPS) & Steel Framed Commercial Buildings for sale
    •
  • Sips Home Developments
  • Sip Manufacturers
    •

Contact form: Please provide the following contact information;

Name

Work Phone

Home Phone

FAX

Mobile Phone

E-mail

How can I help you ?


 

  All personal information is held strictly confidential.

Sips Home Manufacturers ~ Sips Homes for sale ~ SIPs Buildings for sale,

 
     
 

 
     
 
     
 
 
     
 
     
 
     

     
 
 
 
 
     
 
 
     
 
 
 
 

Contact Our at 1-928-710-3210 for more information on SIPs Homes & Houses:

     
 

 

 

 

 

 

 

 

 
 
     
     
 
     
 

     Foam Homes & Houses, SIPs Homes & Sips Houses, Expanded PolyStyrene (EPS) Residential and Commercial Buildings- Structurally Insulated Panel Systems (SIPs) Homes, Houses & Commercial buildings constructed with Expanded PolyStyrene (EPS) foam and tubular steel frames available from our Manufacturers based in Prescott Arizona. Contact us at the link below for a SIPs Home, or for an Expanded PolyStyrene (EPS)- Styrofoam & steel framed house home or commercial building. For more information about the availability of a SIPs; home or an EPS house please call  1-928-710-3210

 
     
       Our SIPs home manufacturers can design any type of home, house or commercial building to meet your needs or requirements.  Any where from a simple cabin to a 10,000 (plus) sq ft Tuscan Style Luxury home. Our buildings have an R-30 rating on the walls, an R-50 on the roof, and unlike conventional stick framed homes we can provide a 17' vaulted ceiling without additional cost to you.  Our Expanded PolyStyrene (EPS) tubular steel framed homes are the most durable product available in the market place  
     

For More Information Contact: Our at 1-928-710-3210

 
     
 

 

Building Panel Combines
Foam Insulation and Steel Frame
           
 
       
           
        There are two unmistakable trends in the home building industry. First, dimensional lumber is losing its place as the dominant structural material. Second, manufactured components are steadily replacing site-built ones. Soon, panelized walls will leap to greater importance. We are well-positioned for both trends.

     Our engineered panels feature 18 ga. steel tubes for strength and expanded polystyrene (EPS) foam for insulation. Wall panels are 7-1/4 in. thick (R-30) and roof panels are 11-1/2 in. thick (R-50). EPS foam is ozone-safe, because it uses air for a blowing agent, rather than CFC and HCFC compounds used by some other foam makers.

     The panels are made by first routing channels for the 1x2 steel tubes. They are placed on opposite sides of the panel every 24-in. Each tube is connected to its mate with a long screw. Foam separates the opposing steel tubes, preventing thermal bridging. In the wall panel, 5-1/4 in. separates the tubes. Four steel angles placed on the top and bottom edges join the steel tubes. These angles can span the ends of adjacent panels to lock them together. Panels can be up 32 ft. long.

     A 20 ga. steel angle wraps each corner, and fastens to the tubes. Siding screws directly to the tubes. Window and door openings are built into the panels and wrapped with 2x8 lumber. Roof panels sit on a ridge beam, so the entire upstairs has cathedral ceilings.

     The wall panels can be used below grade, too. The panels sit on a standard footing. Treated plywood is attached to the panel and then covered with waterproofing.		  
       
 

    
       With R-30 walls and R-50 roofs made from SIPs panels, the heating load is about 25 to 30 percent of a wood-framed house, so low that a high-recovery water heater satisfies all water heating and space heating needs. A wiring chase is preformed into the wall panels and electrical boxes attach to the steel tubes. The manufacturer recommends that plumbing be located in interior partitions or in specially-built plumbing chases.

     The building system Includes a unique feature: minimalist rim joists. Only the top chord of the metal-web floor truss bears on the outside walls. The lower chord hangs entirely inside the panel walls. Instead of a 10- to 12-in. rim joist, the comparable area in the Universal Foam Tech, Inc. wall is only 1-1/2-in.		  

 Roof Panels
     Roof panels by Our are 4’ wide and 12” thick and up to 36’ long. They are supported by ridge and purlin (mid-span) glue laminated beams. Gable, Hip, Mansard, Arched and Flat roofs can all be constructed using Our roof panels.

     By design all Our roofs are vaulted in the interior. The vaulted area can be left vaulted and showcase the expansiveness of your rooms or a floor can be constructed within to create a loft area thereby Increasing square footage of living space within the same sized envelope.

     Skylights and dormers are easily Incorporated into Our roofs.

Exterior Walls

     Standard Our exterior wall panels are 7 1/4" thick. Other thickness sizes are available specific to individual customer needs. All window and door openings, and associated headers, are built into the Our panels at the factory. Further, an electrical chase is factory routed into each wall panel.

     In most cases it is not necessary to use exterior sheathing, however, all panels should be wrapped in the field with house wrap as a good building practice.

     Wall panels are custom made specific to each structures í architectural plans. Lengths may vary from 3" to 40' or more, and while panel heights of 8', 9', and 10' are standard, Our will build wall heights of any size to suit your needs. Curved walls are also available as part of our standard panel offering.

     All types of exterior finishes; aluminum siding, brick, cedar shake, metal siding, stone, stucco, vinyl or wood siding are compatible  with the Our panelized wall system.